Cleaning of common sense

Household cleaning range hood cleaning

&Nbsp;   Chamber cleaning cleaning cleaning method for range hood saves time and effort when most people clean the range hood, habit removal to clean cleaning company in Beijing, which is a waste of time, and easily damaged parts. Is introduced without disassembling the machine, cleaning method and saves time and effort.
    1. Take a plastic bottle (can use various drink bottles are hand flat), on the cover with needles poking over more than 10 holes then mount the proper amount of cleaning concentrate, then fill it up with warm water and shake even.
    2. Start the cooker hood, filled with plastic bottles of clean fine washes part spray cleaning fluid, oil pollution and the dirty water to flow into the storage bin, filled with down.
    3. Bottle of cleaning fluid after use, continue to prepare, repeat cleaning. Until the flow of dirty water clean so far, depending on the degree of fouling, cleaning 3 times to rinse.
    4. Such as fan blades with mesh cover should nets scored first to strengthen the washing effect.
    5. Wipe clean inlet with a rag around the casing surfaces and lampshades.
&Nbsp;   range hood is not often easy to stain it, before using the hood the hood around the surface covered with plastic wrap on it, because the film is rather thin, and good adsorption you spread it on the range hood surface, usually very docile, glued to the top. Range hood use after a period of time, if the dirty plastic wrap directly off and replaced with new plastic wrap on it. Do not clean the range hood.
&Nbsp;   also has, fume machine of that Sheng put drops down of oil of plastic small party box middle, best plug several Zhang compared rough of toilet paper in inside, toilet paper for oil of adsorption force also strong, such,, you clean fume machine of when, just to with tweezers will that several Zhang full has oil copies of toilet paper pulled out on line has, then again put clean of in inside. Very convenient.
&Nbsp;   way to use pipeline gas to prevent oil-gas pipeline building users will encounter this: glue on the gas pipeline the oil is thick and difficult to remove. Describes a precautionary approach: first gas drilling oil to undertake a thorough cleanup, and then using the calendar note for pattern cutting waste (5 cm) or so wide, along the gas pipe wrap, not only elegant, but note in Exchange for dirty very easily.

© 2019 Shenyang Hi Clean Clean Cleaning Co.,Ltd, All rights reserved.